green star/valtra
I have John Deere star fire sf2 steering systems that use universal steering wheel motors for steering on 2 Valtra 213's (non auto trac ready). They are good but the steering wheel motor is quite bulky...
View ArticleTractor gps signal out cable
Does anyone know if it is possible to get a GPS signal out of a new mf 7718s? I want to use the tractors GPS to supply the signal to our mueller controlled knight sprayer. The sprayer came with a...
View ArticleMassey NMEA to RDS Artemis
For the last 10 years I have successfully had a RDS Artemis box linked to a Trimble EZ250 to provide GPS position and forward speed for a Sulky fertiliser spreader. I now have a new Massey with...
View ArticleJohn Deere Gen4 won't do variable rate.
We have a 6215r with a Gen 4 display. We have a 2016 Kuhn 40.2 spreader, 2014 JD750a drill and a Vad Rapid Drill think it's a 2007. The Gen4 I am told will not do variable rate with my machines, they...
View ArticleCase isobus question
Hello have a case Pune with 700 pro screen running isobus for lemken drill, screen has section control available but needs a gps feed to control it, so how do I connect to my trimble fmx screen to give...
View ArticleGen 4 JD GPS Painting where driven
Hi I just wonder if it is possible to make the screen paint where u have driven without activete the "GPS-line"? Example if i drive on the turntable and dont want to record it with GPS can i still make...
View ArticleClik here to view.
Remote engage foot switch Trimble Ez Steer wiring diagram
Does anyone know which number pins the 2 wires plug into on a 25 pin plug like photos for a foot switch to engage auto steer
View ArticleJohn Deere GreenStar
So I'm in a new job used to use RTK but new job using GreenStar . When spraying headlands how do go about it using GreenStar and when on the main tramlines that have already been set up but possibly...
View ArticleWhat options to put guidance on an auto steer ready MF?
I have identified a possible second hand MF 7722. It’s auto steer ready so what are my options for getting gps on it, preferably with enough accuracy for drilling? I had been looking at putting a...
View ArticleJohn Deere WIFI dongle?
Has anyone found a compatible WIFI dongle for wireless data transfer? I got a price from JD a while back and it was silly money just for a dongle when you can get universal ones for under £20! Thanks.
View ArticleFieldbee
Closed my eyes, crossed me fingers and sent €7000 (around £6300) to a Dutch bank account! This should get me a complete RTK retrofit autosteer setup and an L1/L2 base station to use across the farm...
View ArticleCoverage Switch
Has anyone come up with a simple solution to record coverage with a GFX750/NAV900 on a non ISOBUS tractor. Its on a MF7480VT need to utilize Lift arms and also SCVs for different operations.Im sure...
View ArticleIsobus sectioncontrol hardi 6500
Hello from cold Finland. I hope that someone here could help. I am now using a hardi sprayer with an hc6500 controller with a jobcom and trimble cfx750 sectioncontrol. I bought new tractor with isobus...
View ArticleCnh trimble auto steer
Have a case ih puma 230cvx steer ready from the factory which was fitted with second hand nh rtk auto steer equipment almost 2 years ago. Has never worked right since it was installed. It just won't...
View Articlemueller touch unresponsive
so my touch800 stopped working, coincidentally after i got stuck in a lot of mud today, dont know if a short occured or what but i also have a L79 fault in my deutz computer this is annoying, i cant...
View ArticleTopcon AGI-4 upgrade to RTK
Hi all, i own a Fendt 718 SCR which came wit a built in Topcon AGI-4 GPS , on EGNOS . I've wanted to upgrade it to RTK and i found a radio module that i bought. Now when i opened the reciever, i noted...
View ArticleTopcon x30 problems
Just started using a new to me x30 in a bateman. It keeps getting confused and thinks I'm going backwards instead of forwards. Recalibrating the compass fixes it but its a pain, any suggestions.
View ArticleXCN-2050 TRIMBLE - CNH
Consultation: 1.- XCN-2050 and TMX-2050 is the same? 2.- What are the ways to update the NavController III, I don't have the wifi modem 3.- Display software compatibility with the NavController, TM-200...
View ArticleFendt varioguide rs232
Hi, Just wondered if anybody knows if it is possible for varioguide to take / read in rs232 variable rate info and use it to control an isobus device? I'd also be interested to know if there is an easy...
View Article