JD 6000 dome tracker?
Had anybody fitted a tracker in a JD6000 dome? Mines gone walk about and don't want to lose another.
View ArticleBest GPS for spraying using ATV?
Hi everyone, I'm a bit new to all this so if I'm rehashing an old thread or discussion then please accept my apologies. My questions is this. What GPS or more likely DGPS or RTK is best for use when...
View ArticleGalileo support on the Topcon AGI-4
Old Topcon brochures talk about future support for Galileo. Their current website gives ridiculous specification data, nothing about different frequencies and constellations. Is anyone aware if they...
View ArticleClik here to view.
Outback s-lite puck antenna
I have a class branded outback s-lite lightbar with a puck antenna like this... The antenna signal strength has recently all but disappeared. It flicks between ready and warning up while it finds an...
View ArticleNh intelliview iv experts
When I setup a new headland it automatically sets it up as half the implements width. This is fine when spreading fert etc. It puts me 18m from boundary @36m. Its annoying though when drilling as...
View ArticleAgco (Topcon) GPS vs Topcon GPS
I'm told only Agco (topcon) will work through the datatronic screen and associated wiring in an MF 7718 - would I be better getting Agco Topcon or ordinary Topcon with a separate screen- I'm guessing...
View ArticleReichardt angle sensor
Not 100% sure but think i have a problem with a reichhardt wheel angle sensor. I am sure a bush has disintegrated on the pivot. Running greenstar through reichhardt steering on fastrac. Cant keep it...
View ArticleJD GPS on Fendt 500
Has anybody fitted a JD autosteer system to a new type Fendt 500 series, specifically where and how did they mount the receiver? I'm using a Starfire 3000 receiver, 2630 screen and ATU 200 wheel.
View ArticleClik here to view.
Fendt countour assist upgrade
Can anyone explain in laymans terms what the function of the buttons in the attached picture actually do.... there is nothing in the help section on the vario guide that explains much and no documation...
View ArticleSection control
Hi , is anyone running a Knight trailblazer , with a JD6R tractor , using section control through the tractor screen , the sprayer we have is isobus with Muller controller . Thanks
View ArticleTrimble receiver hire
We have just bought a NH t7210 which is autosteer ready . It has been used before so all wiring , brackets etc are fitted . Do any dealers hire them for the autumn ?
View ArticleTrimble 750
I have a trimbe xcn 750. Its missing its roof attena. Is there any other ones that would fit without being too expensive
View ArticleInefficiencies in modern farming?
Hi all, I am an Ag- Engineering student. Soon I will be asked by my college to make a project for my course based upon making something better. I have decided to do this project on something Electrical...
View ArticleCheap yield meter
Hi, I have purchased viariable rate fert spreader, will be doing soil analysis after the harvest and do other things that can save me some money/ improve yields. In my opinion, all this is pretty...
View ArticleClik here to view.
Anyone yield mapping with a New Holland?? help required
Is there anyone on here successfully and accurately importing yield maps from a New Holland combine (intelliview 3) as for some reason it not happening for us I'm getting the maps and field...
View ArticleJohn deere brown box yield monitor
I have one of these but seem to have managed to get the settings wrong (by fiddling with the buttons) and now can’t get back It used to show farm field yield and moisture on the ‚run‘ page ie whilst...
View ArticleSetting Latency and overlap on FM 750
I have a Trimble FM 750, I’ve just done a hard reset and can’t get latency and overlap to save! Each time gps gets turned off it just goes back to default settings anyone out there got any ideas??
View ArticleTrimble EZ Steer and cfx 750 in Claas Lexion 760
Hi we have a Trimble ez pilot system with a cfx 750 display in our fastrac. Thinking about swapping it onto the combine (Claas Lexion 760) for harvest as think we would benefit from auto steer on long...
View ArticleClaas Yield Mapping to Memory Card
Hi, I bought a generic CF memory card in the hope to do some yield mapping this year but the combine isn't recognising it. I'm pretty sure this is because it needs the correct structure of folders in...
View Article