RTk signal.
We have a Leica guidance system and an rtk base station (belongs to local dealer) that is starting to become unreliable and needing regular update. The same dealer has fitted a new Trimble base...
View ArticleConvert Claas laser pilot to Trimble GPS
Our 2009 Claas Lexion 580 currently has laser pilot. But at harvest time we have a Trimble FMX system spare. Does anyone know if it’s possible to retrofit the gps to the combine? As it must already...
View Articlenew gps system
Looking to replace our old Leica gps system. Who make the most popular systems and likely to have the best longevity in the market place. Dont want to be let down by buying into a system and then the...
View ArticleRauch Axis 30.2 EMC / EMC + W
Hi, Looking at the Axis 30.2, seems like a good buy, but i cant really figure out what im missing on the EMC-model (hydraulic version) vs. the EMC + W? Anyone got a clear picture on the difference?
View ArticleUsed Vaddy Rapid 300C with section-control
Hi, Im assuming to get section control/variable rate support on a rapid you need the e-control/isobus version after 2015 - but is there anything else that needs to be enabled/on the drill to make it work?
View ArticleBlack box Core
Hi Is it possible to create .shp files with Blackbox core or do I need to create them elsewhere and import to BB Core. I thought that I could create .shp files at home ready for import into BB Marine...
View ArticleNmea out off itc antenna
Hello! I try to get a nmea signal from a JD ITC antenna but have trouble to get it to send it. I have run ITC config on my laptop and they connect but when I press gga it doesn't except it and can't...
View ArticleMaking your own vr maps.
If I could go and measure my soil pH with a little probe, could I make these into a map for vr lime spreading? If so, how?
View ArticleClik here to view.
Greenstar at 17kph
Bit if a greenstar newbie here. Started spreading today with ATU 200 and 2630 screen. At 17kph, lines were very wobbly. Is this normal or have I not set something right
View ArticleProject wanted for robotics and automation engineer
Hi all, I’m a robotics engineer and project manager looking to move into the agricultural industry, and so I’m topping up my education with a masters from Harper Adams Uni. I’ve done one project...
View ArticleTemporal changes in EGNOS satellites from January to March 2020
For those of you who rely on EGNOS for machinery guidance, you should please take into acount the following information to be able to use EGNOS normally between January and March 2020. Due to...
View ArticleGPS system for Countryside Productivity Small Grant Scheme SG40 and R2-SG77
I really need a GPS for drilling with Case Magnum 7120 (M reg) pulling a 4m Great Plains direct drill. The drill is over 8m long, so not really an act of war to turn back on myself on the headland!...
View ArticleRangepoint rtx drilling 4m
Anyone have any settings for using a 4m combi one pass drill ??
View ArticleTrimble GFX 750 in new Massey Ferguson
Anybody using the GFX in a new Massey, how are you engaging auto steer is it through a button on the screen or remote switch or can it be linked into the joystick buttons on the armrest
View ArticleMultispectrum sensor / cameras... low budget?!?!
Not sure if this is in the right sub-forum to post in but has anyone had any success hacking together a decent thermal multi spectrum sensor camera setup? The DJI stuff is priced stupidly high for obv...
View ArticleSIM card for rtk
Hi I’ve read some old threads about SIM card gps, just wondered if the technology had improved and was more reliable nowadays, I’ve been told roaming SIM cards would be best, it would be for a fendt...
View ArticleEgnos Varioguide, no signal
Hi All, for 2 years i have been working with a Topcon AGI4 reciever in our Fendt. It works with Egnos correction signal (no RTK) and i always had a pretty good accuracy (20cm) , enough for what i use...
View ArticleTRIMBLE CABLES WANTED 62817 and 62257
Hi I am looking for 1 or 2 trimble EZ500 power cables 62817 to fir the ez^s with ez-steer. And also 1 cable 62257 (cabe ez-controller to ez-motor). Need them here in Luxembourg/Europe , pay in advance...
View ArticleKverneland tellus
Can anyone tell me if it has to be a kv GPS receiver that you need for a tellus for GPS for sect ion control etc I'm currently feeding GPS speed and position to my tellus from a patchwork black box but...
View Article