Guidance on the cheap
Hi all, I am considering a cheap GPS setup for fertiliser spreading only so I only need + or - 30 cm accuracy or so and no autosteer or anything fancy. I saw a FW article that tested a number of what...
View ArticleTrimble ez boom onto bateman
as above really Ez guide 500 and ez boom 2010 onto rb17 2011 model year, anybody done it? Have been looking at the cabling guide and it appears I may just be able to get a cable and connect into the...
View ArticleJD 2630
Hi my touch screen packed in today. ie no action when touched. Has anyone had any joy in getting these fixed. It's now the third one for me. Not up to agriculture IMO.
View ArticleTopcon correction source setup
I have a few questions about my Topcon x14, can anyone lend a hand? It's just the basic one with SGR1 receiver on the roof with access to the free satellites.. 1. Should correction source be Autonomous...
View ArticleTopcon x30
Does anyone know how to adjust the minimum speed gps drop out on an x30? I am powerharrowing on a challenger around 2.5kph and it drops the steering. Every so often due to lack of speed.
View Articledeutz 5 series isobus problem
anyone have a deutz 5 series with isobus? i have a problem where my terminal is unable to pickup the speed, tested the terminal in a 7 series it works fine the dealer replaced all the electronic...
View ArticleFinally Spilling the Beans on RTK GNSS
Guys, I've written an article on RTK GNSS with prices and experiences good & bad. I come from the world of robotics and arrived at knowledge that you guys had all along after much pain!...
View ArticleFendt variguide
Just had the antenna fitted on my 720 for a demo just on the egnos. How easy is it to use and is there anything I need to know about sheeting it up cheers daz
View ArticleClik here to view.
EZ Guide 150
I'm well aware that I may have an antique here... I have an EZ Guide 150 (imported from the US many years ago, and I'm it's third owner now), which has been adequate for feet spreading & spraying,...
View ArticleLatest Fendt VarioTerminal/VarioGuide SW updates?
Would anyone be able to list feature updates on the VarioTerminal screen since November 2015? Fendt web sites seem to cover changes up to this date. We service all tractors at home but cannot take care...
View ArticleEz steer
Whats an ez steer worth? Ive got one in good condition but no boxes. Minded to sell it if its worth something
View ArticleReceiving RTK correction signal (crm+ or RTCM3) with smart phone app.
Hi, Looking to use my phone as a modem/rover to receive a correction signal, rather than a dedicated modem and sim card. has any one found an app that can do this. I have found a Bluetooth dongle that...
View ArticleSet the navigation point to the implement on an X30/C3000
I'm trying to learn how to use the AGCO C3000 (mostly the same as Topcon X30) auto-steer screen. I did not find instructions from the manual on setting the navigation point to the implement instead of...
View ArticleTopcon sgr1
Hi can anyone tell me the price of a sgr1 and the cable to fit 110 system? My age 2 has stopped sending time and date info? Thanks
View ArticleVariable rate drilling
Is anyone seeing the benefits of variable rate drilling? Everyone seems to have a different opinion on this and I am yet to decide if we are doing the right thing?!
View ArticleStarfire
Anyone seen this issue before,Track spacing and working width both set to 7.5m and saved in machine profile but when you go back where it displays both track width and working width together it is...
View ArticleNewholland t7 With JD autotrac
have an auto steer (intellisteer) ready t7.210 and wondering how much to fit jd autotrac to it and kit needed???
View ArticlePatchwork eco+
Using a patch work eco+ working at 16 meters for fertiliser. It measures fine with worked area to my left but only 14 meters with worked area to the right. Been in touch with patch work but no solution...
View ArticleParadyme RTK wanted
Just seeing if anyone has a redundant RTK Paradyme, I have a customer who is looking for an extra on for his NH combine. PM me with any details Thanks Vince
View Article