Our AGCO C3000 wiring harness does not include wiring for the COM2 port for GPS/NMEA output. My intention was to save a couple of hundred Euros by building the cable from parts.
I failed to find any information about the pin-out for the screen connectors. Someone must have built their own cable, I'd be glad if this knowledge was shared. Since I only need the serial output, I could simply measure the pin, switch output on and off and see which pin follows the settings but knowing the pin...
Topcon X30/AGCO C3000 COM2 serial port wiring harness
I failed to find any information about the pin-out for the screen connectors. Someone must have built their own cable, I'd be glad if this knowledge was shared. Since I only need the serial output, I could simply measure the pin, switch output on and off and see which pin follows the settings but knowing the pin...
Topcon X30/AGCO C3000 COM2 serial port wiring harness